CATALOG
BETA®
Backshell
Adaptor
Tool Sets Technical Data Pages
Beta
System Utilization
Connector Identification Index
Connector
Mate® Assembly Vise
Torque
Tools
Strap
Wrenches
Jam
Nut Sockets
General
Purpose Backshell and Accessory Tools
National
Stock Numbers for Beta Series Tooling
M39029 Connector & Contact Cross Reference
EU RoHS Compliance
FAR
Compliance
Facts
Glossary
PDF Catalogs Aircraft Tool Kits
Beta Backshell
Connector Tooling Guide
GSA - SCIT
Safe-T-Cable™
Tensile Test Systems
You will need Adobe Acrobat Reader to view our PDF Catalogs. If you do not have it, click the image below to download your free copy.
If you would like to receive a copy of our catalog on CD or in print, please send an email request to: catalog@dmctools.com. Be sure to include your name, company name and complete address and any particular requests or needs that you may have.
|
|
| General
Purpose Backshell
& Accessory Tools
|
 ADJUSTABLE
JAM NUT
The JR700
adjustable jam nut wrench is a versatile tool for maintenance
and low volume production. The rugged all steel construction
makes this tool a good choice for heavy duty applications.
The tool
may be adjusted to accommodate hex nuts from .75 inches to
3.25 inch (across flat) dimensions. The maximum working
depth is 1.0 inch. This range has been found to accommodate
most common connectors.
A standard
3/8 inch drive torque wrench may be used in conjunction with
this tool to limit the possibility of over tightening.
The overall
length is 11.5 inches and the approximate weight is 2 lbs.
SOFT
JAW ADJUSTABLE PLIERS
The BT-SJ-468
soft jaw adjustable pliers are a handy addition to general
maintenance tool stations. This tool can provide a reliable
gripping function for assembly, disassembly, and positioning
of circular and oval parts.
The soft
jaw inserts are replaceable and may be ordered as separate
parts (part number BT-SJ-468-1). This part number applies
to an individual jaw (two pieces are required per tool).
The overall
length is 9.5 inches and the approximate weight is .5 lbs.
|
TORQUE CONVERSION CHART
FOR JR700 TOOL |
Conversion Factor
(Intersection of
2 Columns) |
Desired
Torque Value (In Lbs.) |
| 40 |
60 |
80 |
100 |
120 |
140 |
160 |
180 |
200 |
Diameter
of Part
Being
Tightened
(Inches) |
.50 |
7.04 |
10.57 |
14.09 |
17.62 |
- |
- |
- |
- |
- |
| .75 |
7.23 |
10.84 |
14.46 |
18.08 |
21.69 |
- |
- |
- |
- |
| 1.00 |
7.42 |
11.13 |
14.85 |
18.56 |
22.27 |
25.99 |
- |
- |
- |
| 1.50 |
7.84 |
11.77 |
15.69 |
19.61 |
23.54 |
27.46 |
31.39 |
- |
- |
| 1.75 |
8.07 |
12.11 |
16.15 |
20.18 |
24.22 |
28.26 |
32.30 |
36.34 |
- |
| 2.00 |
8.31 |
12.47 |
16.63 |
20.79 |
24.95 |
29.11 |
33.27 |
37.46 |
41.59 |
| 2.25 |
8.57 |
12.86 |
17.15 |
21.44 |
25.72 |
30.01 |
34.30 |
38.59 |
42.88 |
| 2.50 |
8.83 |
13.24 |
17.66 |
22.07 |
26.49 |
30.90 |
35.32 |
39.73 |
44.15 |
| 2.75 |
9.14 |
13.71 |
18.28 |
22.85 |
27.42 |
31.99 |
36.56 |
41.13 |
45.70 |
| 3.00 |
9.45 |
14.18 |
18.90 |
23.63 |
28.36 |
33.08 |
37.81 |
42.54 |
47.27 |
| 3.25 |
9.78 |
14.68 |
19.57 |
24.46 |
29.36 |
34.25 |
39.14 |
4.04 |
48.93 |
|
|
REFERENCE DIAMETER |
TOOL PART NUMBER |
|
INCH |
METRIC |
| .618 |
15.69 |
DRP-08 |
| .734 |
18.64 |
DRP-10 |
| .858 |
21.79 |
DRP-12 |
| .954 |
24.23 |
DRP-14 |
| 1.112 |
28.24 |
DRP-16 |
| 1.198 |
30.42 |
DRP-18 |
| 1.322 |
33.57 |
DRP-20 |
| 1.448 |
36.77 |
DRP-22 |
| 1.574 |
39.97 |
DRP-24 |
| 1.674 |
42.51 |
DRP-26 |
| 1.970 |
50.03 |
DRP-28 |
CIRCULAR
RING PLIERS
The DRP-XX
circular ring pliers are specifically designed to grip circular
connector and backshell components which would be deformed
by other gripping methods. The nonmarring rubber jaw
lining material is available in strip form and may be used
to replace worn jaw inserts. It is held in place by
interlocking fingers which are molded into the material.
The following
chart defines the working diameters and the tools which are
available in this series.
Each tool
has an overall length of 9 inches and approximate weight of
.5 lbs. |
|
CONNECTOR
HOLDING PLIERS
The CW100-X
connector holding plier series of tools are appropriately
suited to connector maintenance and assembly operations where
the connector and related hardware must be stabilized.
For further assembly or disassembly. These operations
included installation/removal of contacts, soldering, applying
safety wires, installing saddle clamps or other strain relief
components, mounting screws which hold receptacle connectors
in place, and many more functions. The split ring design capable
of gripping a range of diameters and includes a split ring
of a different diameter on the opposite side of the tool head.
In most cases the smaller diameter grips the plug portion
of the connector, while the larger diameter is usually compatible
with the mating receptacle connector.
NOTE:
Applications requiring rotational force such as torquing of
backshell components should be performed with other types
of tooling such as adaptor tools.
The following
chart lists tool diameters and approximate connector application.
Tool
Part
Number |
Large
Inch |
Diameter
Metric |
Small
Inch |
Diameter
Metric |
Approximate
Shell Size* |
| CW100-1 |
.605 |
1.54 |
.415 |
1.05 |
8-11 |
| CW100-2 |
.690 |
1.75 |
.530 |
1.35 |
12-15 |
| CW100-3 |
.930 |
2.36 |
.800 |
2.03 |
16-19 |
| CW100-4 |
1.172 |
2.98 |
1.022 |
2.60 |
20-23 |
| CW100-5 |
1.388 |
3.53 |
1.280 |
3.25 |
24-25 |
| CW100-6 |
1.551 |
3.94 |
1.530 |
3.89 |
26-28 |
*Actual
shell size may differ in some applications.
Each tool ha an overall length of 7.5 inches and an approximate
weight of .75 lbs. |
 |
TOOL IDENTIFICATION
CHART
(See Picture) |
|
A |
BT-HT-110 |
1/4"
Socket Driver Handle |
|
B |
BT-HT-210 |
1/4"
Stationary Drive Mounting Arm |
|
BT-HT-211 |
3/8"
Stationary Drive Mounting Arm |
|
C |
BT-D-0551 |
3/8"
to 1/4" Adaptor |
|
BT-D-0622 |
1/4"
to 3/8" Adaptor |
|
D |
BT-HT-107 |
3/8"
Square Drive T-Handle Wrench |
|
E |
BT-HT-100 |
1/4"
Square Drive T-Handle Wrench |
|
F |
BT-A-0513 |
Ratchet
3./8" Drive |
|
G |
4-1149 |
Illuminated
Magnifier |
Consult
the factory or authorized DMC
distributor for more information. |
|
|
