|
Introducing Safe-T-Cable®  M39029 Connector & Contact Cross Reference EU RoHS Compliance FAR Compliance 
Facts Glossary PDF Catalogs Aircraft Tool Kits You will need Adobe Acrobat Reader to view our PDF Catalogs. If you do not have it, click the image below to download your free copy. If you would like to receive a copy of our catalog on CD or in print, please send an email request to: catalog@dmctools.com. Be sure to include your name, company name and complete address and any particular requests or needs that you may have. |
Special Applications
ELONGATED
FERRULES Fasteners that have limited clearance between the safety wire hole (less than .100 inch), and the surface of the component to which the fastener is attached, can present a challenge to the installation of SAFE-T-CABLE®. This is due to the clearance required by the application tool nose, adjacent to the fastener.
It is DMC's mission to be responsive to the needs of SAFE-T-CABLE® users. One more example of the DMC responsiveness is the Self-Looping SAFE-T-CABLE®. There are many applications for lockwire where holes do not exist in a fastener or other part of the assembly. The common practice is to wrap the wire around a casting web, pin, or similar feature, and then anchor the other end to the fastener. The Self Looping SAFE-T-CABLE® provides the user a means of anchoring a threaded fastener to almost any structure.
Another type of application where the Self-Looping SAFE-T-CABLE® offers a clear advantage over lockwire is when it replaces lockwire on turnbuckles, castellated fittings, and other applications where holes are not provided at either end of the cable. In those cases, the cable is threaded around the fittings and terminated back at the hole in the captive link on the head of the SAFE-T-CABLE®.
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SCTE62xx Battery Powered
Most
SAFE-T-CABLE®
installations can be made with standard components and applications tools,
however, there are conditions that require modification or alterations
to the standard product lines to incorporate simple solutions to the difficult
SAFE-T-CABLE®
applications, DMC has established
itself as the industry leader.
A
special elongated ferrule is available for those installations.
The longer reach of the ferrule provides a stand off to the tool nose.
Combine that with the radius on the end next to the fastener (radius not
required on the F10-08 .020 elongated ferrules due to the small outside
diameter). The angle allows the ferrule to be installed at an angle
without loss of tension on the cable when the ferrule returns to the straight
position.
FILLER
WASHER
The
operator simply wraps the cable through (or around) the structure, and
back through the hole in the captive link at the head of the cable.
The operator then pulls the slack out of the cable, and threads it through
the head of the fastener, and terminates to with a standard application
tool.
  DMC, 526 Thorpe Road, Orlando, FL 32824-8133 USA Tel: 407-855-6161 * Fax: 407-855-6884 * Email: dmc@dmctools.com ISO9001/2008 * AS9100:2004 Send email to Webmaster@dmctools.com with questions or comments about this web site. Terms and Condition of Use for This Website. Copyright © 2009 Daniels Manufacturing Corporation, All Rights Reserved |
Daniels Manufacturing Corporation does not accept Employment Applications or Resumés via Email.