Battery Powered Hydraulic GMT Series Crimp Tools
DMC is pleased to present our GMT Series battery powered hydraulic tools to crimp open barrel (stamped and formed) contacts, insulated and non-insulated terminals, splices, and end caps, coaxial connectors, and wire fittings of all types are covered by these tools. Just like with the hand tools, locators are included for applications where they are needed to hold contacts in the correct location for optimum crimping.
GMTEBxxx
The GMTEBxxx Series Battery Powered Hydraulic Commercial Standard Crimp Tools are hand held, self-contained crimp tools. The crimp head, battery, and pump unit are contained in one ergonomic tool body and weigh about 4 pound each. They are equivalent to DMC’s GMT Series hand tools.
TOOL INCLUDES: Carrying Case, Two 18v Batteries (P/N: HDE-LI-B), One Battery Charger (P/N: HDE-LI-120C).
FEATURES
- Ergonomic design allows
one-handed operation
- Jaws remain closed under spring pressure (pinch sides
to open/load
- Head rotates 350 degrees
- Red LED to display the charge status of the battery
CRIMP CAPACITIES
- Max. Crimp Force: 4 Tons
(35.6 kN)
- Avg. Crimp Time: 3 seconds
- Avg. Crimps per Charge: 100
- Avg. Charge time: 15 minutes
SPECIFICATIONS
- Length: 13" (330 mm)
- Width: 2.87" (72.9 mm)
- Depth: 4.5" (114.3 mm)
- Weight (with battery): 2.8 lb
(1.3 kg)
- Hydraulic Oil: Shell Tellus® T-15 (or equivalent)
GMTEB232 FOR M81824/1-XX ENVIRONMENTAL SPLICES
GMTEB232 Tool is the battery powered equivalent to our GMT232 (M22520/37-1) hand tool for low profile environmental splices (M81824/1-XX). The GMTEB232 is the most popular GMT Series tool to cover the range of 12 (yellow), 16 (blue), and 20 (red) splices for low profile environmental splice applications. This precise tool has a locator which is configured to hold the splice in the correct location while either wire is being terminated.
GMTExxx-R Remote Head
Battery Powered Hydraulic Crimp Tool
The GMTExxx-R Remote Head Battery Powered Hydraulic Crimp Tools are hand held, self-contained crimp tools. The crimp head is separate from the battery and pump unit by a hydraulic umbilical cord. This reduces the held weight to 2 pounds, about the same as the hand tool.
These tools are equivalent to DMC’s GMT Series hand tools.
The battery and pump unit can be worn by the operator on a tool belt, stored in a carrying case, or mounted to a bench top.
TOOL INCLUDES: Two Batteries (P/N: HD-BATTERY-R), One Battery Charger (P/N: HD-110CHARGER-R).
GMTExxx-R
FEATURES
- Ergonomic design allows one-handed operation
- Jaws remain closed under spring pressure
- Connection point for tool balancing systems
CRIMP CAPACITIES
- Max Crimp Force: 3500 lb / 15.6 kN Max
- Oil Pressure: 4000 psi / 276 bar Max
- Crimp Time: Approx. 3.5 seconds
- Crimps per Charge: Approx. 250
- (May vary with crimp force requirements & battery life.)
CRIMP TOOL SPECIFICATIONS
- Length: 9.25 "/ 235 mm
- Width: 2.5" / 63.5 mm
- Depth: 2.5" / 63.5 mm
- Mass/Weight: 2.02 lb / .916 kg
- Sound Level: 72 db
- Hose Length: 4.5 ft
POWER UNIT SPECIFICATIONS (With Battery Installed)
- Length: 9.8" / 248 mm
- Width: 3.1" / 80 mm
- Depth: 5.6" / 142 mm
- Weight: 4.3 lb / 2.0 kg
- Sound Level: 72 dBA
- Hydraulic Oil: 1.7 oz ./ 48g
Shell Tellus* T15
- Charging Voltage: 10.8 VDC
Lithium Ion Battery
- Charging Time: 40 Minutes (Approximately)
GMTE232-R FOR M81824/1-XX ENVIRONMENTAL SPLICES
GMTE232-R Tool is the battery powered equivalent to our GMT232 (M22520/37-1) hand tool for low profile environmental splices (M81824/1-XX). The GMTE232-R is the most popular GMT Series tool to cover the range of 12 (yellow), 16 (blue), and 20 (red) splices for low profile environmental splice applications (Tyco Mini-Seal). This precise tool has a locator which is configured to hold the splice in the correct location while either wire is being terminated.
Tool Belt P/N: 2063863-1
|
AC Adapter P/N: HD-110AC
|
Bench Mount P/N: BM-7
|
| Tool Belt, AC Adapter, and Bench Mount sold separately. |
|
