M7928/1-11 to -19,
Size 22 |
 |
(similar terminal shown)
Type: |
Class 1 Insulated Terminals, Insulation Restricting |
Insulation: |
Nylon, UL 94V-2 |
Terminal Body & Sleeve: |
Copper, ASTM B-152 |
Plating: |
Copper, ASTM B-152 |
Max Temp Rating: |
105° C |
TOOL SELECTION GUIDE** |
TERMINAL SPECS |
DMC TOOL/DIE OPTIONS |
AWG |
WIRE SIZE
mm |
INSULATION DIAMETER INCHES (mm) |
SLEEVE COLOR |
TERMINAL / SPLICE PART NUMBER |
HX4 SERIES* |
HX3 SERIES* |
M22520/40-01
TOOL* |
HX4 SERIES SINGLE CAVITY |
HX4 SERIES MULTI CAVITY |
| #22 |
0.38 |
.038-.110 (0.97-2.79) |
Red w/ Green Stripe |
M7928/1- |
11 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| 12 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| 13 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| 14 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| 15 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| 16 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| 17 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| 18 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
| 19 |
Y501 Die |
X511 Die |
AMT4001 |
Y672 Die |
Y1060 Die |
*MIL APPROVED.
**If MIL Approval is required, QPL status should be verified. Consult DMC for current status. |
TERMNAL MANUFACTURERS' PART NUMBER |
TERMINAL SPECS |
TERMINAL MANUFACTURERS' TERMINAL # |
AWG |
SLEEVE COLOR |
TERMINAL / SPLICE PART NUMBER |
BURNDY |
HOLLINGSWORTH |
MOLEX |
PANDUIT |
THOMAS & BETTS |
TYCO ELEC |
| #22 |
Red w/ Green Stripe |
M7928/1- |
1 |
-- |
-- |
-- |
-- |
-- |
52273 |
| 2 |
-- |
-- |
-- |
-- |
-- |
2-36149-3 |
| 3 |
-- |
-- |
-- |
-- |
-- |
51863-2 |
| 4 |
-- |
-- |
-- |
-- |
-- |
1-320551-2 |
| 5 |
-- |
-- |
-- |
-- |
-- |
2-36153-3 |
| 6 |
-- |
-- |
-- |
-- |
-- |
2-320571-3 |
| 7 |
-- |
-- |
-- |
-- |
-- |
2-320572-2 |
| 8 |
-- |
-- |
-- |
-- |
-- |
2-320573-1 |
| 9 |
-- |
-- |
-- |
-- |
-- |
2-328975-1 |
| NOTE: Component manufactures’ and OEM instructions shall take precedence over the information presented in these charts. Wire ranges are for reference only. |
TOOLS AND DIES FOR CRIMPING TERMINALS AND SPLICES
DMC has several die configurations for crimping terminals and splices. AWG size is one determining factor, but each die configuration has a designated tool series. The hand tool is the basis of each tool series and suitable for the low volume of prototype or repair work. For higher volume production and intermediate/depot maintenance, a tool series might include pneumatic tools, hydraulic tools, battery hydraulic tools, or electric hydraulic tools.
NOTE: If MIL Approval is required, QPL status should be verified. Consult DMC for current status.
HX4 TOOL SERIES OPTIONS FOR Y-DIES |
 |
HX4 |
Hand Crimp Tool |
 |
UDT4 |
Upside Down Hand Crimp Tool |
 |
HXE4B |
Battery Hydraulic Crimp Tool |
 |
HX23 |
Pneumatic Crimp Tool |
M22520/40-01 TOOL OPTIONS |
 |
AMT4001 |
Hand Crimp Tool |
HX3 TOOL SERIES OPTIONS FOR X-DIES |
 |
HX3 |
Hand Crimp Tool |
 |
PHX3 |
Pneumatic Crimp Tool |
|
