Celebrating Over 60 Years...

As the World Leader in Tool Systems & Technology for the
Aerospace, Military and Telecommunications Industries.

 

Products


M39029 Connector & Contact Cross Reference

EU RoHS Compliance
FAR Compliance

Have questions about our products? Email us at dmc@dmctools.com or call us at 407-855-6161.

PDF Catalogs

Aircraft Tool Kits
Beta® Backshell
Connector Tooling Guide
GSA-SCIT
Safe-T-Cable®
Tensile Test Systems

You will need Adobe Acrobat Reader to view our PDF Catalogs. If you do not have it, click the image below to download your free copy.

abode reader

If you would like to receive a copy of our catalog on CD or in print, please send an email request to: catalog@dmctools.com. Be sure to include your name, company name and complete address and any particular requests or needs that you may have.


ABOUT SSL CERTIFICATES
 

MS21004-15 to -21,
Sizes 12 to 10

 M7928/1-1 to 10 Terminal
(similar terminal shown)             
Type:
 Class 1 Uninsulated Terminals, Rectangular Tongue
Insulation:
 N/A
Terminal Body & Sleeve:
Copper, ASTM B-152
Plating:
 Tin, ASTM B-545
Max Temp Rating:
 175° C

TOOL SELECTION GUIDE**
TERMINAL SPECS
DMC TOOL/DIE OPTIONS
AWG
WIRE SIZE
mm
INSULATION DIAMETER INCHES (mm)
SLEEVE COLOR
TERMINAL / SPLICE PART NUMBER
HX4 SERIES MULTI CAVITY
(ONE INDENT)
HX4 SERIES MULTI CAVITY
(TWO INDENTS)
GMT SERIES TOOL
(ONE INDENT)
GMT SERIES TOOL
(TWO INDENTS)
DCT4 SERIES TOOL
#12-10 2.62-6.64 N/A N/A MS21004- 15 Y554 Die Y788 Die GMT277 GMT1005 DCT4-105D Die
16 Y554 Die Y788 Die GMT277 GMT1005 DCT4-105D Die
17 Y554 Die Y788 Die GMT277 GMT1005 DCT4-105D Die
18 Y554 Die Y788 Die GMT277 GMT1005 DCT4-105D Die
19 Y554 Die Y788 Die GMT277 GMT1005 DCT4-105D Die
20 Y554 Die Y788 Die GMT277 GMT1005 DCT4-105D Die
21 Y554 Die Y788 Die GMT277 GMT1005 DCT4-105D Die
**If MIL Approval is required, QPL status should be verified. Consult DMC for current status.

TERMNAL MANUFACTURERS' PART NUMBER
TERMINAL SPECS
TERMINAL MANUFACTURERS' TERMINAL #
AWG
SLEEVE COLOR
TERMINAL / SPLICE PART NUMBER
BURNDY
HOLLINGSWORTH
MOLEX
PANDUIT
THOMAS & BETTS
TYCO ELEC
#12-10 N/A MS21004- 15 -- -- -- -- C486 --
16 -- -- -- -- C483 --
17 -- -- -- -- C482 --
18 -- -- -- -- C481 --
19 -- -- -- -- C485 --
20 -- -- -- -- C484 --
21 -- -- -- -- C480 --
NOTE: Component manufactures’ and OEM instructions shall take precedence over the information presented in these charts. Wire ranges are for reference only.

TOOLS AND DIES FOR CRIMPING TERMINALS AND SPLICES

DMC has several die configurations for crimping terminals and splices. AWG size is one determining factor, but each die configuration has a designated tool series. The hand tool is the basis of each tool series and suitable for the low volume of prototype or repair work. For higher volume production and intermediate/depot maintenance, a tool series might include pneumatic tools, hydraulic tools, battery hydraulic tools, or electric hydraulic tools.

NOTE: If MIL Approval is required, QPL status should be verified. Consult DMC for current status.

HX4 TOOL SERIES OPTIONS FOR Y-DIES
HX4 HX4 Hand Crimp Tool
UDT4 UDT4 Upside Down Hand Crimp Tool
HXE4B HXE4B Battery Hydraulic Crimp Tool
HXE4-R HXE4-R Remote Head Battery Hydraulic Crimp Tool
HX23 HX23 Pneumatic Crimp Tool

GMT TOOL SERIES OPTIONS
GMT232 GMTxxx Hand Crimp Tool
GMTEB GMTEBxxx Battery Hydraulic Crimp Tool
GMTE-R GMTExxx-R Remote Head Battery Hydraulic Crimp Tool

DCT TOOL SERIES OPTIONS
DCT4 DCT4 Hand Crimp Tool
DCTE4B DCTE4B Battery Hydraulic Crimp Tool