Daniels Manufacturing Corporation

> > >

(click image for more)

Price: $1,874.49 PC

Contains 3 line item(s).

PDF Legend

Datasheet

Envelope Drawing
(I)

Instruction Sheet
(M)

Safety Operation Manual
(S)

Series Literature

DMC P/N:	DCTE4
Name:	DCTE4 BATTERY POWERED CRIMP TOOL
Weight:	12.00 LBS
PDF's Available:

DCTE4 Battery Powered Crimp Tool (DIES SOLD SEPERATELY)

The DCTE4 Battery Powered Crimp Tool is a hand held, self-contained crimp tool intended to crimp copper and aluminum cable with DMC "DCT4" Dies.
Hexagonal crimp dies for coaxial cable and "B" crimp dies for stamped and formed contacts are available in a variety of combinations having single, double, triple and even quadruple cavity design.	Typical "DCT4" Die Sets
These dies accommodate most insulated and uninsulated terminals and splices conforming to AS7928 as well as numerous proprietary configurations.
Dies in various crimp patterns are also available for D-Subminiature connectors, Red/Blue/Yellow "Heat-N-Seal" terminals, "MiniSeal" terminals, and low profile environmental splices (M81824/1-XX).
If your application requirement is not already covered by one of our standard die sets, our engineering department will be pleased to discuss a design to suit your needs, consult DMC for details.
The DCTE4 meets the requirements of RoHS Directive 2002/95/EC.
FEATURES • Ergonomic design allows one-handed operation • Die automatically opens when crimp is complete • Die can be retracted in mid-cycle to adjust connector • Head rotates 350 degrees • Connection point for tool balancing systems • Red LED to display the current status of the unit
CRIMP CAPACITIES • Max. Crimp Force: 1.5 Tons (13.3 kN) • Avg. Crimp Time: 2 seconds • Avg. Crimps per Charge: 150
SPECIFICATIONS • Length: 14" (356 mm) • Width: 2-3/8" (60 mm • Depth: 3-1/8" (80 mm) • Weight (with battery): 2.8 lb (1.3 kg) • Sound Level: 75 db(A) at 1 meter • Vibration: <8.2 ft/s2 (2.5 m/s2) • Hydraulic Oil: Shell Tellus® T-15

	BATTERY (P/N: HD-BATTERY) • Charging Voltage: 9.6 VDC • Charging Time: 40 minutes • 2 batteries included with each new tool
	BATTERY CHARGER (P/N: HD-110CHARGER) • Input Voltage: 100-120 VAC, 50-60 Hz • Output Voltage: 7.2-12 VDC, 3.0 A • Trickle Charge: 60 mA • Weight: 1.1 lb (.5 kg)

DCT4 Die Sets (SOLD SEPERATELY)
DCT4-101D	corresponds to AMP 58573-1
DCT4-102D	for R/B/Y Insulated terminals & splices
DCT4-104D	for R/B/Y Heat-N-Seal terminals
DCT4-105D	for Uninsulated terminals
DCT4-106D	with .178/ .128 hexes, .042 square
DCT4-107D	with .068/.178/.324 hexes
DCT4-108D	with .068/.213/.255 hexes
DCT4-109D	with .213/.128/.105 hexes
DCT4-110D	with .324/.255/.068/.042 hexes - corresponds to Trompeter CD3-2
DCT4-111D	with .128 hex
DCT4-116D	with .067 gage crimp for relay seals
DCT4-117D	with .255/.213/.178/.128 hexes
DCT4-118D	with .213/.178 hexes
DCT4-119D	with .095/.085/.075 gaging for B/R/Clear Insulated splices
DCT4-120D	with .359/.255 hexes
DCT4-122D	with .095/.085.066 gaging for B/R/Y Insulated splices
DCT4-128D	with .211/.128/.105 hexes
DCT4-129D	with .067/.047/.030 gaging - corresponds to GMT232
DCT4-130D	for Sub-Miniature D connectors
DCT4-138D	with .264/.161 hexes
DCT4-139D	with .264/.220 hexes
DCT4-140D	with .433/.402 hexes
DCT4-141D	for "B" style crimps
DCT4-142D	with .142/.112/.079 hexes
DCT4-144D	with .359/.290 hexes
DCT4-145D	with .454 hex
DCT4-147D	with .429/.100/.068 hexes
DCT4-148D	with .268/.178 hexes, .057 dia.
DCT4-1 49D	with .268/.213/.178/.150 hexes
DCT4-160D	with .041 gage for "B" crimp
DCT4-161D	with .041 gage for "B" crimp
DCT4-162D	with .042 gage for "B" crimp
DCT4-163D	with .290 gage
DCT4-166D	with .187/.178 hexes, .042 square - corresponds to Amphenol CTL-15
DCT4-167D	with .324/.319/.255 hexes, .042 square - corresponds to Amphenol CTL-14
DCT4-169D	with .324/.255/.068 hexes, .052 square - corresponds to Amphenol CTL-8
DCT4-170D	with .290/.128/.105 hexes
DCT4-175D	with .051/.0395/.031 gaging for "B" crimps - AMP Multimate III & VI
DCT4-176D	with .368 hex - corresponds to Y498
DCT4-178D	with .033/.016 gaging for "B" crimps
DCT4-179D	with .079 gaging for "B" crimp
DCT4-183D	with .339 hex
DCT4-184D	with .057 gaging for "B" crimp
DCT4-185D	with .075/.066 gaging for W/Y Insulated terminals
DCT4-187D	with .235/.225/.215 hexes
DCT4-188D	with .110 hex
DCT4-189D	with .222 hex

		DMC, 526 Thorpe Road, Orlando, FL 32824-8133 USA Tel: 407-855-6161 * Fax: 407-855-6884 * Email: dmc@dmctools.com ISO9001/2008 * AS9100:2004 Send mail to webmaster@dmctools.com with questions or comments about this web site. Terms and Condition of Use for This Website. Copyright © 2010 Daniels Manufacturing Corporation, All Rights Reserved		We Accept
Daniels Manufacturing Corporation does not accept Employment Applications or Resumés via Email