Composite Jam Nut Socket

BT-J-164

Your Price

$42.30

Register/Login for purchase options

Composite Jam Nut Socket

The correct application of torque is essential to most connector applications where Jam Nut receptacle connectors are used.  The sealing components (usually an "O" ring) must be compressed, but not to the point of damage.  Another consideration when tightening Jam Nuts is the thread strength.  This is extremely important in the various types of aluminum and composite connectors.

DMC Jam Nut Socket tools have been developed specially for the installation of Jam Nut receptacle connectors.  They are available in a versatile composite construction which is an excellent choice for OEM assembly areas due to their light weight, and the non-marking surfaces, a durable machined aluminum series and the traditional "General Purpose" formed steel socket for non-torque specific applications.

A unique process was developed to mold this composite material which contains a higher percentage of fiber glass than is customarily used in conventional molding technology.  this makes them as light and a s strong as possible. The material will not scratch plating, or damage the finish on cabinets, panels or bulkheads when properly used.

Fits Jam Nut Size (inches):  2.860 - 2.956
Fits Jam Nut Size (mm):  72.64 - 75.08
Square Drive (inches):  3/8
Outside Diameter Reference (inches):  3.66
 

Specification Value
Weight 0.6 LBS
National Stocking Number 5120014637894

Limited Warranty / Limitation of Liability*

Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.

This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.

 

Returns

Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.

 

To obtain an RMA, please contact our Sales Department at 407-855-6161 or sales@dmctools.com.

Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.

 

Return material will be subject to a re-stocking charge up to twenty percent (20%). 

 

RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.

 

Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.