12-240 In-Lb Digital Torque Wrench
BT-ST-302D
Your Price
$936.66
Head Type:
Square drive 72 teeth, sealed flex and fixed ratchet
3/8" square drive
Display:
Display Type: Dot Matrix LCD (168 x 48 Resolution)
Viewing Angle: 6:00Backlight: White (LED)
Functions:
Set - torque or angle target
Track - real time display of torque or accumulated angular rotation with progress lights
Peak Hold – 5 sec. flashing of peak torque or alternating peak torque/angle on release of torque
Peak Recall - display last peak torque or peak torque/angle on button press
Memory - display of last 1500 peak torque or peak torque/angle readings
Accuracy:
Temperature: @ 22 C (72°F)
Angle: ±1% of reading ±1° @ angular velocity > 10°/sec < 180°/sec
Torque: CW ±2%, CCW ±3% of reading, 20% to 100% of full scale
(unflexed) CW ±4%, CCW ±6% of reading, 5% to 19% of full scale
Operating Temperature:0°F - 130°F (-18°C to 54°C)
Storage Temperature:0°F to 130°F (-18°C to 54°C)
Measurement Drift:
Angle: -0.12 Angular Degrees per Degree C
Torque: +0.01% of reading per Degree C
Humidity:Up to 90% non-condensing
Battery:Single "AA" Lithium Cell, up to 40 hours continuous operation
Default Auto Shut-off:After 2 minutes idle – (Adjustable, see Advanced Settings)
| Specification | Value |
|---|---|
| Shipping Weight | 3.0 LBS |
Limited Warranty / Limitation of Liability*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.
Returns
Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.
To obtain an RMA, please contact our Sales Department at 407-855-6161 or sales@dmctools.com.
Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.
Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.