DMC1444R F-16 Wiring System Service Kit

DMC1444R

  • Contact Factory for Lead Time

 

Register/Login for purchase options
Sorry, this product is out of stock.
Please Call (407) 855-6161 for Price

DMC1444R MAINTENANCE KIT
The DMC1444R Wiring System Service Kit, provides a turn-key solution and the tools necessary to strip, crimp, install and remove the typical contacts and terminals of this wiring system. The DMC1444R kit includes the tool to application cross-reference information that indicates the particular tool(s) that should be selected to repair a specific connector, contact, or terminal. In addition, the kit also contains illustrated operating instructions for the designated tooling.
 

 

DMC CONNECTOR COVERAGE
MIL-DTL-24308    Rack & Panel 
MIL-DTL-26482    Series 1 and 2
MIL-DTL-38999    Series 1 and 2
MIL-PRF-39012    RF Coaxial 
MIL-DTL-55302    Printed Circuit Boards 
SAE AS81511    Series 4
MIL-C-81703    Series 2 and 3 
MIL-DTL-83723    Series 1, 2, and 3
MIL-DTL-83733    Rack & Panel 
AS50151    3100, 3450 Series 
MIL-R-6106    Relay Sockets 
MIL-T-7928    Insulated Terminals 
Airborn     WTBT Series 
AMP    Champ, W Series 
Amphenol     57, 97 Series 
Amphenol RF    RF Coaxial 
Automatic Connector    RF Coaxial 
Berg/Dupont     Mini-PV Series 
Bendix     PT, SJT Series 
Burndy     Trim-Trid, Hyfen Bantam, PCDD, Smooth Bantam Series 
Cablewave Systems     RF Coaxial 
Deutsch    38174, 94603, CTJ, RTK Series 
Elco     8223 Series 
Garry Mfg.     102 Series 
General Dynamics     RF Coaxial 
Hypertronics     KA Series 
ITT Cannon     DL, D*MA, D*M, 2D, RK Series 
Kings Electronics     RF Coaxial 
Microdot     Printed Circuit Boards 
Micro Mode     RF Coaxial 
Omni-Spectra    RF Coaxial 
Raychem     MTCB, D-436 Series 
Sealectro     RF Coaxial 
Smith, Inc.     HDP Series 
TRW Cinch     Printed Circuit Boards
Teradyne    I/O Series 
Thomas & Betts    Insulated Terminals 
Trompeter    RF Coaxial, Twinax/Triax 
Viking     Thorkom, JN Series 
Virginia Panel     Patchboards
Winchester     HDB, SREC Series 
 

SpecificationValue
National Stocking Number5180-01-533-9526

Limited Warranty / Limitation of Liability*

Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.

This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.

 

Returns

Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.

 

To obtain an RMA, please contact our Sales Department at 407-855-6161 or sales@dmctools.com.

Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.

 

Return material will be subject to a re-stocking charge up to twenty percent (20%). 

 

RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.

 

Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.