
DMC1700C F-35 Lightning II (JSF) Wiring System Maintenance Kit
DMC1700C
The DMC1700C F-35 Wiring System Service Kit, provides a turn-key solution and the tools necessary to strip, crimp, install and remove the typical contacts and terminals of this wiring system. The DMC kit includes the tool to application cross-reference information that indicates the particular tool(s) that should be selected to repair a specific connector, contact, or terminal. In addition, the kit also contains illustrated operating instructions for the designated tooling.
DMC CONNECTOR COVERAGE
MIL-DTL-24308 D-SUB
MIL-DTL-26482 II
MIL-DTL-38999 I, II, III
MIL-DTL-39012 RF Coaxial
AS50151 3400, 3450
MIL-DTL-83723 III
SAE 81511 III, IV
MIL-DTL-12883 Relay Sockets
M81824 Environmental Splices
MIL-T-81714 Terminal Junctions
Deutsch “RE Series”
Gore Circular
JSFC14/JSFC15/ JSFC16 JSF Standard
JSFC32 JSF Standard
JSFC35 JSF Standard
JSFC43 JSF Standard
JSFC44 JSF Standard
JSFC46 JSF Standard
JSFC48 JSF Standard
JSFC51 JSF Standard
JSFC53 JSF Standard
JSFC55 JSF Standard
JSFC57 JSF Standard
JSFC59 JSF Standard
JSFC63 JSF Standard
JSFC70 JSF Standard
JSFC73/JSFC74 JSF Standard
JSFC83 JSF Standard
JSFC92 JSF Standard
JSFC94 JSF Standard
JSFC98 JSF Standard
JSFC109 JSF Standard
JSFC134 JSF Standard
JSFC142 JSF Standard
JSFQ05 JSF Standard
JSFQ08/JSFQ09/JSFQ10 JSF Standard
JSFQ14 JSF Standard
JSFQ16 JSF Standard
JSFQ20 JSF Standard
JSFQ24 JSF Standard
JSFQ54/JSFQ55 JSF Standard
JSFQ57 JSF Standard
JSFQ72 JSF Standard
JSFQ81 JSF Standard
Times Microwave -
Trompeter 150/3105
Specification | Value |
---|---|
Shipping Weight | 375.0 LBS |
Limited Warranty / Limitation of Liability*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.
Returns
Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.
To obtain an RMA, please contact our Sales Department at 407-855-6161 or sales@dmctools.com.
Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.
Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.