DMC2119 KC-46A Pegasus Wiring System Service Kit
The DMC2119 KC-46A Pegasus Wiring System Service Kit provides a turn-key solution and the tools necessary to strip, crimp, install and remove the typical contacts and terminals of this wiring system. The DMC2119 kit includes the tool to application cross-reference information that indicates the particular tool(s) that should be selected to repair a specific connector, contact, or terminal. In addition, the kit also contains illustrated operating instructions for the designated tooling.
DMC CONNECTOR COVERAGE
Aerospace Optics Lighted Push Button Switches
Amphenol Relay Sockets, CTV, PT-CE, TV, Single-Wire Splices
Amphenol RF RF Coaxial
Array Galley Connectors
Boeing Standards BACC45, BACC63, BACC64, BACC65, BACS16, BACS52, BACT12, BACT13, BACC66, BACL110
Comm Scope RF Coaxial
Glenair Mighty Mouse
Hi-REL AS50151, 3450 Series
ITT Cannon BKA*, CA-Bayonet, DPX*A, KJA
Kidde Fire Detection Connectors
Kings RF Coaxial
Leach Relay Sockets
Radiall EPXA/EPXB, NSX
Souriau/Burndy M22TAC, YAV, 892
TE Connectivity Ultra-Fast, D-150, DK-621, PIDG, Solistrand, Copalum, D-436
MIL-DTL-12883 Relay Sockets
MIL-DTL-26482 1, 2
MIL-DTL-26500 Firewall Connectors
MIL-DTL-38999 1, 2, 3
MIL-DTL-39012 RF Coaxial
MIL-DTL-81659 Arinc 404
MS-9177 Telephone Jack
|Shipping Weight||35.0 LBS|
|Shipping Weight||35.0 LBS|
Limited Warranty / Limitation of Liability*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.
Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.
To obtain an RMA, please contact our Sales Department at 407-855-6161 or firstname.lastname@example.org.
Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.
Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.