DMC314MOD1 F-16 Fighting Falcon Kit
The DMC314MOD1 kit contains all of the tooling to connector, contact and terminal cross-reference information needed to support the F-16 Fighting Falcon. In addition, the kit also contains illustrated operating instructions for the required tooling.
DMC314MOD1 CONNECTOR COVERAGE
Airborn WTBT Series
AMP Champ, W Series
Amphenol 57, 97 Series
Amphenol RF RF Coaxial
Automatic Connector RF Coaxial
Berg/Dupont Mini-PV Series
Bendix PT, SJT Series
Burndy Trim-Trid, Hyfen Bantam, PCDD, Smooth Bantam Series
Cablewave Systems RF Coaxial
Deutsch 38174, 94603, CTJ, RTK Series
Elco 8223 Series
Garry Mfg. 102 Series
General Dynamics RF Coaxial
Hypertronics KA Series
ITT Cannon DL, D*MA, D*M, 2D, RK Series
Kings Electronics RF Coaxial
Microdot Printed Circuit Boards
Micro Mode RF Coaxial
Omni-Spectra RF Coaxial
Raychem MTCB, D-436 Series
Sealectro RF Coaxial
Smith, Inc. HDP Series
TRW Cinch Printed Circuit Boards
Teradyne I/O Series
Thomas & Betts Insulated Terminals
Trompeter RF Coaxial, Twinax/Triax
Viking Thorkom, JN Series
Virginia Panel Patchboards
Winchester HDB, SREC Series
MIL-PRF-6106 Relay Sockets
AS7928 Insulated Terminals
MIL-C-23329 RF Coaxial
MIL-DTL-24308 Rack & Panel
MIL-DTL-26482 Series 1 and 2
MIL-DTL-38999 Series 1 and 2
MIL-DTL-39012 RF Coaxial
AS50151 3100, 3450 Series
MIL-C-55235 TPS Series
MIL-C-55302 Printed Circuit Boards
MIL-C-81511 Series 4
MIL-C-81703 Series 2 and 3
MIL-DTL-83723 Series 1, 2 and 3
MIL-DTL-83733 Rack & Panel
|Shipping Weight||290.0 LBS|
|National Stocking Number||5180-01-170-9605|
Limited Warranty / Limitation of Liability*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.
Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.
To obtain an RMA, please contact our Sales Department at 407-855-6161 or firstname.lastname@example.org.
Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.
Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.