DMC519 Airbus A318, A319, A320, A321, A330, A340 Wiring System Maintenance Kit
The DMC519 kit contains the tooling to connector, contact and terminal cross reference information which indicate the particular tool(s) that should be selected to repair a specific connector, contact, or terminal. In addition, the kit also contains illustrated operating instructions for the required tooling.
Since these tools, together with their operating instructions, are contained in a single kit, the connector repair can be made in the shortest time possible, thus permitting a rapid return of your aircraft to service. Tool kit supplied in 1 environmentally sealed Ultra High Impact Copolymer case and includes: Name Plate, Foam Pads/Inserts, Contents Charts, Instruction Charts, and Tool Selection Charts.
DMC519 CONNECTOR COVERAGE:
Air LB Junction Modules, Relay Sockets
AMP HD-22, RME Series, RF Coaxial,
PIDG Insulated Terminals/Splices, Solistrand Uninsulated Terminals/Splices
Connectral 208 Series, Relay Sockets
Deutsch DBA, FDBA, 992, 983
ITT Cannon BKAE/D, DPX, DPXMA, PVW, HTAMF Series
Jupiter JAR, JA, JAM Series
Matrix Science MB, MB92, NSA93815 Series
Radiall NSX, DSX Series
Socapex RJT, JT Series
Souriau 8525, 8526, S600, 8533, 8665, 8T, 8559
Arinc 600 Rack and Panel
MIL-C-26500 Firewall Connectors
TOOL KIT CONFIGURATION
Type of Case: Portable
Number of Cases: 1
Type of Construction: Ultra High Impact Copolymer
Application: A318, A319,A 320, A321, A330, A340
Coverage: Airframe Power Connectors, Terminals size 12 AWG and Smaller, Coaxial Connectors
Type of Inserts: Unicellular Polyethylene Foam with Die Cut Tool Cavities
|Shipping Weight||36.0 LBS|
Limited Warranty / Limitation of Liability*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.
Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.
To obtain an RMA, please contact our Sales Department at 407-855-6161 or firstname.lastname@example.org.
Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.
Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.