Hydraulic 5.5 Ton Crimp Tool
- Uses HD51 Series Dies
- Wire Range: #12 to #2/0 AWG
- Dies sold separately
The HD51hydraulic crimp tool is intended to crimp terminals onto copper and aluminum cables with DMC’s HD51
die sets. This small hand-held tool provides 5.5 tons of crimp force and up to 2/0 AWG conductors in many applications. It also
features an automatic relief valve to prevent over-compression.
The HD51 hydraulic crimper features rugged construction and comfortable handle grips for the best ergonomic advantage. The
number of handle closures required to complete the crimp is reduced by the larger and more efficient hydraulic pump system. The
DMC1383 tool kit contains the HD51 hand tool and 12 dies for crimping insulated and uninsulated terminals and splices size 8
through 2/0 AWG.
• L x W x H: 14 x 2 x 5 (in) 356 x 50.8 x 127 (mm)
• Weight: 4.6 pounds (2.08 kg)
• Release lever for relaxing crimp pressure and opening dies
• 180º rotating head for ease in confined work areas.
There is also a remote hydraulic head version (Part # XHD51).
|Shipping Weight||11.5 LBS|
|Military Part Number||M5259/5-01|
|National Stocking Number||5120014637892|
Limited Warranty / Limitation of Liability*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.
Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.
To obtain an RMA, please contact our Sales Department at 407-855-6161 or email@example.com.
Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.
Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.