Battery Powered Crimp Tool


  • Dies sold separately

Your Price

Will Ship Within: 10 Weeks


Register/Login for purchase options

The HDE51B Battery Powered Crimp Tool is a hand held, self contained crimp tool intended to crimp terminals onto copper and aluminum cables with DMC’s HD51 die sets. 

The HDE51B provides 6 tons of crimp force and extends the range of DMC’s Battery Powered Crimping Tools to 2/0 AWG conductors in many applications.


• Length:  15.37 inches (391 mm)
• Width:  2.93 inches (75 mm)
• Depth:  4.56 inches (116 mm)
• Weight (with battery):  5.88 lbs (2.7kg)
• Sound Level:  75 db(A) at 1 meter
• Vibration:  <8.2 ft/s2  (2.5 m/s2)
• Hydraulic Oil:  Shell Tellus® T-15 (or equiv)


• Crimping Capabilities: up to 2/0 AWG for uninsulated terminals and up to 2 AWG for insulated terminals.
• Max. Crimp Force: 6 Tons (55 kN)
• Avg. Crimp Time: 4 seconds
• Avg. Crimps per Charge: 100  (varies with size and type of items crimped)
• Avg. Crimps per Charge: 200 (with Extended Life Battery)


• 18 VDC, Lithium Ion, 1.5 AMP
• Charging Time:  15 minutes
• 2 batteries included with each new tool


• 18 VDC, Lithium Ion, 3.0 AMP
• Charging Time: 30 minutes 


• 120 VAC P/N:  HDE-120AC-A
• 240 VAC P/N:  HDE-230AC-A


• 120 VAC P/N:  HDE-LI-120C
• 240 VAC P/N:  HDE-LI-230C

Shipping Weight36.0 LBS

Limited Warranty / Limitation of Liability*

Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.

This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.



Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.


To obtain an RMA, please contact our Sales Department at 407-855-6161 or

Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.


Return material will be subject to a re-stocking charge up to twenty percent (20%). 


RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.


Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.