Tensile Tester - Portable 200# Load Cell
This item has been discontinued and has been replaced with theHPT-200B.
Daniels Manufacturing Corporation introduces a portable tensile tester capable of pull testing wire crimps up to 200 pounds (up to 10 AWG wire in most cases).
HPT-200 Hand-Held Pull TesterThe lab is no longer the limit…
It is only natural that the company, which is known throughout the world for quality wire termination tools and equipment would add the very best portable tensile tester to meet your need for fewer sources and improved support through a wider range of capabilities. The HPT-200 hand-held pull tester combines the accuracy and rugged design of the Alphatron pull testers into a portable battery powered unit. We follow that up with our expert factory service and calibration.
The HPT-200 portable tester is an extension of the Alphatron Wire Crimp Pull Tester line of products, which include the PT-150H and MPT-250B. These testers perform pull-force measurements on wire terminations. The rugged construction and portable design of these test machines make any of them a superior choice for on-site or laboratory use.
The lightweight Alphatron HPT-200 is a self-contained tester that extends your testing capability to the shop floor. You no longer have to wait for process samples to arrive in the QA Lab. Durable construction and a convenient carry case ensure protection. The Low Stress tensioning mechanism makes the HPT-200 versatile and easy to use. A built in NIHM battery provides up to 14 hours use on a single charge and the Power Management Circuit allows use during charging.
Portable, lightweight and ergonomic design
Built-in NIMH battery, with charger
Up to 14 hour use on a single charge
Low stress tensioning mechanism
Protective carrying caseHPT-200
Shoulder bag (optional)
Built-in calibration test
Accuracy: (0.5% of full scale)
Resolution: (0.1 pounds)
Display in newtons, or kilograms is available
Capacity: 200 lbf, 90.7 kg, 889 N
Accuracy: ± .5% of full scale
Resolution: .1 lbf
Display Type: Digital display w/peak hold reading
Display: LDC w/.56 in. high digits
Electrical: 115 VAC 50/60 Hz or 12 VDC Int. Battery
Operating Temperature: 50F to 100F (10 to 38C)
Height: 2 in. (5.08 cm) case
Width: 9.5 in. (24.13 cm) case
Depth: 6.25 in. (15.87 cm) case
Weight: 2.5 lbs. (1.21 kg) case and hand unit
|Shipping Weight||35.0 LBS|
Limited Warranty / Limitation of Liability*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.
Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.
To obtain an RMA, please contact our Sales Department at 407-855-6161 or firstname.lastname@example.org.
Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.
Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.