Open Frame Crimp Tool - M22520/5-01
- Qualified to AS22520/5
- Accommodates Daniels "Y" series crimp dies
Qualified to AS22520/5*, the DMC HX4 crimp tool features a system of interchangeable dies (accommodates "Y" series dies) which eliminate the need for separate fixed die crimp tools for each and every different application. Many maintenance and production organizations have standardized on one of these models, thus eliminating the cost associated with maintaining and calibrating bulky inventories of single purpose, dedicated tools.
Tremendous flexibility and cost advantages exist with this crimping system due to the wide variety of military and proprietary interchangeable dies available for this tool frame. As new requirements evolve, a new set of dies is all that’s required to meet the demand.
Crimping dies are snapped into the tool frame and retained in place by internal spring clips. They may be permanently secured, if desired, by pressing a roll pin into the holes provided.
The tool frame is equipped with a positive ratchet assembly which controls complete handle movement in both directions.
HEXagonal crimp dies are available in a variety of combinations having single, double, and even triple cavity design. These dies accommodate most coaxial and triaxial connectors and contacts conforming to MIL-DTL-39012, AS39029, and numerous proprietary configurations. Other designs are available for coaxial connections requiring different termination techniques.
Dies in various crimp patterns are also available for insulated and uninsulated terminal lugs, wire splices and end caps relating to M7928, MS17143, MS25036, MS25181, MS27429, MS25274, MS20659, M81824, MS21003 through MS21015, and commercial part numbers. Several power contacts too large for conventional hand tools are also covered by interchangeable dies for the HX4.
If your application requirement is not already covered by one of our standard dies, our engineering department will be pleased to discuss a design to suit your needs.
Length: 11 inches
Weight: approx. 21 oz.
The DMC169A and DMC169 tool kits consist of an HX4, Blade Micrometer, and 27 die sets. Each tool kit covers Mil-Spec shielding ferrules (MS21980/MS21981) and Mil-Spec coaxial contacts (M39029/6/13/14, M39029/7/8, M83733/13/14 and 0N089558).
|Military Part Number||M22520/5-01|
|National Stocking Number||5120013358575|
|National Stocking Number||5120001326913|
Limited Warranty / Limitation of Liability*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.
Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.
To obtain an RMA, please contact our Sales Department at 407-855-6161 or firstname.lastname@example.org.
Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.
Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.