Battery-Powered Open Frame Crimp Tool - 1.5 Ton
- Accommodates "Y" Dies
- Dies sold separately
Smart Crimping Made Simple
This new crimp tool from DMC® offers next-generation, high-tech features allowing you to track tool performance, users, and projects. Crimp data is viewable in real-time or can be downloaded via an app.
- Bluetooth® Connectivity
- Innovative LED display
- Tracks Number and Quality of Crimps
- Improved Housing Construction
The HXE4C Battery Powered Crimp Tool is a handheld, self-contained crimp tool intended to crimp copper and aluminum cable #26 to #8 AWG with DMC "Y" Dies (M22520/5-xx and others).
Dies in various crimp patterns are also available for insulated and uninsulated terminal lugs, wire splices, and end caps relating to AS7928, MS17143, MS25036, MS25181, MS27429, MS25274, MS20659, M81824, MS21003 through MS21015, and commercial part numbers. Several power contacts too large for conventional hand tools are also covered by interchangeable dies for the HXE4C.
Hexagonal crimp dies are available in a variety of combinations having single, double, and even triple cavity design. These dies accommodate most coaxial and shielded connectors and contacts conforming to MILPRF-39012, AS39029, and numerous proprietary configurations.
The HXE4C meets the requirements of RoHS Directive 2002/95/EC.
Ergonomic design allows one-handed operation
Die automatically opens when crimp is complete
Die can be retracted in mid-cycle to adjust connector
Head rotates 350 degrees
Red LED to display the current status of the unit
#26 to #10 AWG
Max. Crimp Force: 1.5 Tons (13.3 kN)
Avg. Crimp Time: 2 seconds
Avg. Crimps per Charge: 150
Mass/Weight (with battery)=3.95lb (1.79kg)
Sound Level=75db (A) at 1 meter
Hydraulic Oil=Shell Tellus® T-15
Two 18v, 1.5 A Batteries
One Battery Charger
BATTERY (P/N: HDE-LI-B):
18 VDC, Lithium Ion, 1.5 AMP
Charging Time: 22 minutes
2 batteries are included with each new tool
|Shipping Weight||35.0 LBS|
Limited Warranty / Limitation of Liability*
Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.
This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.
Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.
To obtain an RMA, please contact our Sales Department at 407-855-6161 or email@example.com.
Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.
Return material will be subject to a re-stocking charge up to twenty percent (20%).
RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.
Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.