Preset Pneumatic Safe-T-Cable Application Tool with 7 Inch Nose for .022" Safe-T-Cable

SCTP207

Your Price

Will Ship Within: 4 Weeks

$1,730.19

Register/Login for purchase options

When ergonomics and production demands are critical issues and control of tool adjustments is required the DMC SCTP Preset Series Pneumatic Application Tool is a must. This tool is also great where single-handed operation of the tool is desirable.

 

Safe-T-Cable® is threaded through the fasteners, into the ferrule, and into the tool in the same fashion as the manual SCT tools, but the push of a button is all that is necessary to complete the termination. The Pre-Set tool automatically applies tension, crimps and cuts flush in one actuation of the trigger.


The cable tension mechanism is set at the factory and cannot be adjusted by the operator. The cable is fed into a tensioning mechanism on the tool body and tensioned by the tool when actuated.


This tool operates on standard shop air pressure of 100 to 120 psi, and may be suspended from a load balancer for an even greater improvement in ergonomics. Various nose lengths are also available for this tool.

SpecificationValue
Shipping Weight3.25 LBS

Limited Warranty / Limitation of Liability*

Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.

This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.

 

Returns

Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.

 

To obtain an RMA, please contact our Sales Department at 407-855-6161 or sales@dmctools.com.

Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.

 

Return material will be subject to a re-stocking charge up to twenty percent (20%). 

 

RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.

 

Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.