Remote Hydraulic Crimp Head Assembly


  • MS25441-1
  • Dies sold separately

Your Price

Will Ship Within: 12 Weeks


Register/Login for purchase options

TBHD1M (MS25441-1 qualified) remote hydraulic crimp head is a large gauge crimp tool to be used in conjunction with an air supply pump. The TBHD1M exerts 12 tons of crimp force and extends the range of crimping capabilities to 4/0 AWG conductors in military/aerospace applications, and 750 MCM applications on commercial systems.

The TBHD1M accepts the HD002 (MS23002), HD485 (MS90485), HD442 (MS25442), and Boeing ST 2354 die combinations. The recommended hydraulic pump is the HPU11M air over hydraulic powered pump. Daniels also manufacturers 2 manual hydraulic pumps HPU15M (foot pump) and HPU12M (hand pump) as well as a battery-powered pump, HPU13M


• Crimp force: 12.0 tons (107kN)

• Length: 10.0 inches (254 mm)

• Width: 6.0 inches (152.4 mm)

• Weight: 9.6 pounds (6.9 kg)


Shipping Weight8.0 LBS
Military Part NumberMS25441-1

Limited Warranty / Limitation of Liability*

Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.

This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.



Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.


To obtain an RMA, please contact our Sales Department at 407-855-6161 or

Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.


Return material will be subject to a re-stocking charge up to twenty percent (20%). 


RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.


Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.