Twist Strip - Outer Jacket Stripper for Shielded Twisted Cable

TSK8000

  • For Multi-Conductor Twisted Cable 0.081" - .180"
  • MIL Spec - MIL-DTL-32610
  • Single, Two, Three, and Four Conductor Dies Available
  • Uses TSDXXXX Removable and Replaceable Die Sets

Your Price

$1,074.84

Register/Login for purchase options

The TSK8000 has adjustable blades that allow the tool to accommodate variances in the cable. Varying jacket thickness and cable diameter are two examples of common differences you may see in different lots of the same cable. Simple adjustments allow the user to set the cutting blades for a deeper or shallower score of the cable jacket.

Precise:

A cable track precisely machined into each die set creates a controlled rotation of the dies/blades as the cable is moved along the cable. A simple 90° bend of the cable results in the jacket halves separating for removal, reducing the amount of force needed to remove the jacket.

Consistent:

The repeatable function of the tool reduces operator error and is up to 3 to 5 times faster than conventional methods.

Tool Specifications:

- The TSK8000 accommodates a variety of multi-conductor cable having diameters from 0.0625 inches to 0.187 inches
- Strips the outer jacket of shielded twisted multi-conductor, and round cable
- End stripping or window stripping of cable as needed
- Interchangeable stripping dies (with cable track and carbide blade set)
- Adjustable blade depth settings
- Tool Weight:  .81 lbs
- Shipping Weight:  2lbs (includes entire tool and accessories in foam lined case)
- Die Arm Lever Force:  4.4 lbs
- Die Arm Lever Length:  1 inches
- Tool Dimensions:  1.75 inches wide, 9.75 inches tall
- Cable Max OD:  < 0.187 inches / 4.75 mm
- Cable Min OD:  > 0.0625 inches / 1.59 mm
 

Universal Die Sets Sold Seperately

TSK8000
Specification Value
Weight 2.0 LBS
Military Part Number M32610/01-01

Limited Warranty / Limitation of Liability*

Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.

This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.

 

Returns

Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.

 

To obtain an RMA, please contact our Sales Department at 407-855-6161 or sales@dmctools.com.

Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.

 

Return material will be subject to a re-stocking charge up to twenty percent (20%). 

 

RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.

 

Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.