Pneumatic Indent Crimp Tool - Equivalent to AF8 with Side Selector and Cycle Counter

WA27FSS-CC

  • Equivalent to AF8 (M22520/1-01)

Your Price

Will Ship Within: Consult Factory

$2,415.55

Register/Login for purchase options

The WA27FSS-CC is the direct equivalent of the AF8 Standard Indent Crimp hand tool for size 12-26 wire with a Side Select and a Cycle Counter. The WA27F accommodates TH-xxx MIL-standard and commercial series turret heads or TP-xxx MIL-standard and commercial series positioners.

Length: 10”
Diameter: 2 3/4”
Weight: 50 oz.

Optional equipment includes the WA10A Foot Valve, the WA27RF Air Regulator and Filter, and the BM-2A Bench Mount, sold separately.

CRIMP TOOLS DMC Pneumatic tools are often mounted on a Bench Mount, and some find it inconvenient to set or check the setting of the crimp depth selector when the tool is mounted for benchtop use. DMC resolved this issue by creating a version of the tool which moves the crimp depth selector to the side of the tool in a “looking up” position. These tools have the same crimp depth settings as the original tools, but with the knob in a more convenient position: Adding “SS” to the part number of the WA Series Pneumatic Crimp Tools will apply to the Side-Select versions. A retrofit kit is also available for converting standard tools to Side Select tools.

Most shops perform “GO/NO-GO” inspection on crimp tools after a specific period of time. But the usage of crimp tools in production or maintenance operations is inconsistent, and during a given period of time, a tool can be used to terminate thousands of wires, or less than a hundred, maybe none at all. Ideally, tools should be gaged based on actual usage and not a period of time. In order to assist with this, DMC has designed a series of tools which are fitted with ruggedized Digital Cycle Counters that allow users to manage the tool through the inspection cycle based on the number of crimp cycles (actual usage) rather than an arbitrary time period. This greatly increases the number of crimp tools in production by decreasing the number of crimp tools awaiting gaging and balances the use of each tool between inspection events. Each time the handles are closed, whether crimping a contact or just cycling the tool, the cycle is counted. Gage inspection is accomplished with common “GO/NO-GO” gage and the tool is returned to production.

SpecificationValue
Shipping Weight4.7 LBS

Limited Warranty / Limitation of Liability*

Daniels Manufacturing Corporation warrants each new unit sold by it to be free from defects in material and workmanship under normal use and service. DMC’s obligation under this warranty is limited to the free correction or, at DMC’s option, the refund of the purchase price of any such unit which proves defective within Ninety (90) Days after delivery to the first user, provided that the unit is returned to DMC with all transportation charges prepaid, and which shall appear to DMC’s satisfaction, upon inspection by DMC, to have been defective in material or workmanship.

This warranty shall not cover any damage to such products, which in the opinion of Daniels Manufacturing Corporation, was caused by normal wear, misuse, improper operation or accident. This warranty is in lieu of all other warranties express or implied. No warranty express or implied, is made or authorized to be made or assumed with respect to products of Daniels Manufacturing Corporation, other than those herein set forth. The tooling suggested within this website may not cover a user's specific contract or manufacturing requirements. It is the user's responsibility to carry out sufficient testing to verify the suitability of the DMC product selected for the specific requirements of each particular application. DMC is not liable for consequential or special damages of any nature or kind resulting from the use of any of our products. Daniels Manufacturing Corporation is not liable for Consequential or Special Damages of any nature or kind resulting from the use of any of its products. Owners and users of DMC products assume full responsibility for instructing their employees in the proper and safe use of such products. *as defined by PL93-637.

 

Returns

Materials to be returned for exchange or credit must have prior authorization from Daniels Manufacturing Corporation (DMC) in the form of the issuance of a Return Material Authorization (RMA) control number. DMC, at its sole discretion, will determine if an RMA will be issued.

 

To obtain an RMA, please contact our Sales Department at 407-855-6161 or sales@dmctools.com.

Material returned must be standard items produced by DMC, unused, in saleable condition and not more than three (3) months old. Special order or custom made items are not returnable.

 

Return material will be subject to a re-stocking charge up to twenty percent (20%). 

 

RMA's for kits are subject to a twenty percent (20%) to forty (40%) re-stocking charge if the kit is returnable.

 

Return credit must be offset by a purchase order for new DMC product on a dollar for dollar basis.