Shield Banding Tools

DMC’s One-Step Banding Tools are designated for M85049/128- 3, M85049/128-4, M85049/128-7 and M85049/128-8 “stamped buckle” bands. These tools tension, bend, and cut the band in one operation.

.250" One-Step Banding Tool (M81306/1A)

DBS-2100 is the .250 Wide Band Application Tool M81306/1A. The tension-lock system gives the operator a positive indication when the precise tension has been applied. The cut-off handle easily cuts, bends, and locks the shield band in one step.

.125" One-Step Banding Tool (M81306/1B)

DBS-2200 is the .125 Wide Mini-Band Application M81306/1B. The tension-lock system gives the operator a positive indication when the precise tension has been applied. The cut-off handle easily cuts, bends, and locks the shield band in one step.

Verification of One-Step EMI/RFI Band Tools M81306/1C & M81306/1D

Field Verification Inspection Gages are available to check the tension of the DMC One-Step Band Tools. These gages have a precise compression mechanism which has a sequence of indicators to verify that the applied tension is within the specified range for the band which is being applied. It is recommended to check the tension periodically, and if it needs adjustment, the instructions and accessories are provided by DMC for that purpose. The .250 width band tool (DBS-2100 Series) requires the DBS-CG7 (M81306/1C) gage, and the .125 width band tool (DBS-2200 Series) requires the DBS-CG8 (M81306/1D) gage.